* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
$9.9 এর বেশি অর্ডারে বিনামূল্যে স্ট্যান্ডার্ড শিপিং
রিটার্ন পলিসি
পণ্য পাওয়ার তারিখ থেকে 40 দিনের মধ্যে রিটার্ন আইটেম গ্রহণ করা হবে। কাস্টমাইজড আইটেম রিটার্ন বা এক্সচেঞ্জ করা যাবে না। ই-গিফট কার্ড দিয়ে কেনা আইটেম শুধুমাত্র এক্সচেঞ্জযোগ্য; রিফান্ড প্রযোজ্য নয়।
বিনামূল্যে উপহার
Roymall-এ স্বাগতম, প্রিমিয়াম ডিপার্টমেন্ট স্টোর উপহার কেনার জন্য আপনার পেশাদার ওয়েবসাইট। আমরা আপনার সমর্থনকে অত্যন্ত মূল্যায়ন করি এবং আপনার ক্রয়ের সাথে একটি অতিরিক্ত উত্তেজনা যোগ করে আমাদের কৃতজ্ঞতা প্রকাশ করতে চাই। যখন আপনি আমাদের সাথে কেনাকাটা করেন, আপনি শুধুমাত্র উচ্চ-গুণমানের পণ্য উপভোগ করবেন যা আপনার জীবনযাত্রাকে উন্নত করে, কিন্তু আপনি প্রতিটি অর্ডারের সাথে একটি এক্সক্লুসিভ বিনামূল্যে উপহারও পাবেন। আমাদের সংগ্রহ অন্বেষণ করতে এবং আপনার নিখুঁত উপহার খুঁজে পেতে প্রস্তুত? আমাদের প্রিমিয়াম ডিপার্টমেন্ট স্টোর আইটেমের নির্বাচন ব্রাউজ করুন, আপনার অর্ডার দিন, এবং আপনার ক্রয়ের সাথে আপনার বিনামূল্যে উপহার পাওয়ার উত্তেজনা অপেক্ষা করুন।
শিপিং পলিসি
আমরা আপনার অর্ডার পাওয়ার পরে আইটেমগুলি আপনাকে সরবরাহ করার জন্য কঠোর পরিশ্রম করব এবং নিশ্চিত করব যে তারা নিরাপদে পৌঁছেছে। ডেলিভারি বিবরণ আপনার কনফার্মেশন ইমেলে প্রদান করা হবে।বেশিরভাগ ক্ষেত্রে, অর্ডারগুলি 2 দিনের মধ্যে প্রসেস করা হয়। বিশেষ পরিস্থিতিতে, এটি নিম্নরূপ বিলম্বিত হবে: যখন আপনি শনিবার, রবিবার বা ছুটির দিনে অর্ডার করেন, এটি 2 দিনের জন্য বিলম্বিত হবে।সাধারণত, ফ্লাইট বিলম্ব বা অন্যান্য পরিবেশগত কারণ দ্বারা প্রভাবিত না হলে 5-7 কার্যদিবস (সোমবার থেকে শুক্রবার) প্রয়োজন।যেহেতু আমাদের শিপিং সার্ভিস বিশ্বব্যাপী, তাই ডেলিভারি সময় আপনার অবস্থানের উপর নির্ভর করবে, তাই আপনি যদি দূরবর্তী জেলা বা দেশে থাকেন তবে কিছু সময় প্রয়োজন হতে পারে এবং ধৈর্য ধরে অপেক্ষা করুন।
1. রিটার্ন & এক্সচেঞ্জ পলিসি
আমরা শুধুমাত্র roymall.com থেকে কেনা আইটেম গ্রহণ করি। যদি আপনি আমাদের স্থানীয় ডিস্ট্রিবিউটর বা অন্যান্য খুচরা বিক্রেতাদের থেকে কেনেন, আপনি আমাদের পক্ষে সেগুলি রিটার্ন করতে পারবেন না।ফাইনাল সেল আইটেম বা বিনামূল্যে উপহার রিটার্নের জন্য গ্রহণযোগ্য নয়।রিটার্নের জন্য যোগ্য হতে, আপনার আইটেম অব্যবহৃত এবং আপনি যে অবস্থায় পেয়েছেন সেই একই অবস্থায় থাকতে হবে। এটি অবশ্যই মূল প্যাকেজিং-এ থাকতে হবে।আমাদের কাছ থেকে রিটার্ন নির্দেশনা পাওয়ার পরে, দয়া করে আপনার রিটার্ন আইটেমগুলি প্যাকেজ করুন এবং আপনার প্যাকেজ স্থানীয় পোস্ট অফিস বা অন্য কুরিয়ারে জমা দিন। আমরা আপনার রিটার্ন বা এক্সচেঞ্জ আইটেমটি পাওয়ার পরে 3-5 কার্যদিবসের মধ্যে প্রসেস করব। রিফান্ডটি আপনার মূল পেমেন্ট পদ্ধতিতে স্বয়ংক্রিয়ভাবে প্রসেস এবং ক্রেডিট করা হবে।কাস্টম উত্পাদিত পণ্য, যার মধ্যে কাস্টম আকার, কাস্টম রঙ বা কাস্টম প্রিন্ট অন্তর্ভুক্ত, রিটার্ন বা এক্সচেঞ্জ গ্রহণ করা যাবে না।আরও সাহায্য প্রয়োজন, আমাদের সাথে যোগাযোগ করুন। service@roymall.com বা Whatsapp: +447549870296
2. রিফান্ড পলিসি
আমরা রিটার্ন প্যাকেজ পাওয়ার এবং চেক করার পরে আপনি একটি সম্পূর্ণ রিফান্ড বা 100% স্টোর ক্রেডিট পাবেন। রিফান্ডটি আপনার মূল পেমেন্ট পদ্ধতিতে স্বয়ংক্রিয়ভাবে প্রসেস এবং ক্রেডিট করা হবে।দয়া করে মনে রাখবেন যে শিপিং খরচ এবং কোনও শুল্ক বা ফি রিফান্ডযোগ্য নয়। একবার প্যাকেজ শিপ হয়ে গেলে অতিরিক্ত শিপিং খরচ রিফান্ডযোগ্য নয়। আপনি এই ফিগুলি পরিশোধের জন্য দায়ী এবং আমরা সেগুলি মওকুফ বা রিফান্ড করতে অক্ষম, এমনকি যদি অর্ডারটি আমাদের কাছে ফেরত আসে। আমরা আপনার রিটার্ন আইটেম পাওয়ার এবং নিশ্চিত করার পরে আপনাকে একটি ইমেল পাঠাব যাতে আমরা আপনার রিটার্ন আইটেম পেয়েছি তা জানাব। আমরা আপনাকে আপনার রিফান্ডের অনুমোদন বা প্রত্যাখ্যান সম্পর্কেও অবহিত করব।রিফান্ড প্রক্রিয়া সম্পর্কে আপনার কোনও সমস্যা থাকলে, আমাদের সাথে যোগাযোগ করুন। service@roymall.com বা Whatsapp: +447549870296
Description: Red Arrow Reversible 3.5 Inch Wood Turning Chuck 1-Inch x 8TPI Thread Wood Lathe Chuck Accessory Jaws Wood Lathe Turning Tool
Specification: RED ARROW 3.5 Inch Wood Turning Chuck Material: Precision machined 1045 high tensile steel Chuck Diameter: 3.5 Inch Connect Thread: 1" x 8TPI thread 1. The RED ARROW wood turning chuck system can sovle all your wood turning problems, provide a variety of solve. 2. The reversible wood turning chuck is a four jaw, self-centering, geared chuck exclusively designed for the wood turning lathe. 3. It comes with a Reverse Lock feature that enables the chuck to be locked securely onto the lathe spindle when using the forward and reverse functions on the lathe. 4. It has a dedicated 1" x 8TPI thread and is able to be used with any lathe that fits those specifications. 5. This chuck comes standard with the unique RED ARROW features such as Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle, and 2" Jaws as standard. 6. Powerful Tuff Lock gearing with precise, hardened action delivers incredibly smooth strength for a solid, vibration free performance. 7. Provide a variety of matching chuck accessory jaws, solve all your clamping problems.
Features: The four jaw design firmly grips both round and square wood. Special woodturning dovetail profile on jaws. Safe Lock Woodworm screw included for fast mounting of rough timbers. Auto safety stop feature-jaw slides can"t protrude past the chuck body. Jaw slides made from high-tech copper fused steel for maximum hardness, wear, and self-lubricating properties. Up to 400mm/16" diameter swing capacity.
RED ARROW Chuck Accessory Jaw
Item
Type
Clamping
Back strut
Fit All RED ARROW Chucks
Min.(mm)
Max.(mm)
Min.(mm)
Max.(mm)
#1
3.5 Inch Chuck 1 Inch x8TPI
/
#2
6028 Short pin jaw
8
29
25
46
#3
6024 Step jaw
9
31
27(37)
49(59)
#4
10028 Heightening jaw
42
64
52
74
#5
10038 gap jaw
58
77
70
89
#6
62317 Pizza jaw
78
100
96
118
#7
6016 Proboscis jaw
44
61
54
71
#8
10031 Increase pizza jaw
107
126
127
146
#9
3.5 Inch Chuck M33x3.5
Package Included: 1 x 3.5 Inch Lathe Chuck(come with woodworm screw, comfortable T bar handle, and 2" jaws as standard) or 1 x Jaw
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 56|
Show Original
A part of the QA has been auto-translated.
0
Q:
do you have chuck to suit a parkside lathe PDM 600 B2
do you have chuck to suit a parkside lathe PDM 600 B2
Não é o conjunto completo. quando você clica em comprar, mostra que é apenas a peça de número 7. Como sempre, uma pegadinha....
It's not the whole set. When you click on buy, it shows that it's just the number 7 piece. As always, a pick-me-up....
Answered by BG193311488 on 25/04/2022Helpful (0)
0
Q:
Hello! Please, what is the distance between the two fixing screw holes for each of the four jaws? I have a chuck here with me, so I want to see if your jaws would fit him. I await an answer! Grateful! Rafael
Hello! Please, what is the distance between the two fixing screw holes for each of the four jaws? I have a chuck here with me, so I want to see if your jaws would fit him. I await an answer! Grateful! Rafael
You can consult online customer service
https://www.banggood.com/Contact-Us_hi111
You can consult online customer service
https://www.banggood.com/Contact-Us_hi111
Answered by The seller on 14/06/2023Helpful (0)
0
Q:
are these made by Teknatool (Nova)? Some of the components in the images have their name on them and that image on the lathe is an old marketing image of theirs.
are these made by Teknatool (Nova)? Some of the components in the images have their name on them and that image on the lathe is an old marketing image of theirs.
Hello I need a chuck that clamps to CZK 547.*****%OFF | 3.5 Inch Reversible Wood Turning Chuck 1-Inch x 8TPI Thread Wood Lathe Chuck Accessory Jaws Wood Lathe Turning Tool M18 goes also this
dobrý den potřebuji sklíčidlo které se upíná na CZK 547.*****%OFF | 3.5 Inch Reversible Wood Turning Chuck 1-Inch x 8TPI Thread Wood Lathe Chuck Accessory Jaws Wood Lathe Turning Tool M18 jde i toto
Hi. It will select only the jaws (#2 - #8). Chucks are the #1 (with 1 inch 8tpi thread) and the #9 (with M*****,5 thread). Be careful which chuck will you select. The first one may have run out and is being uploaded.
Hi. It will select only the jaws (#2 - #8). Chucks are the #1 (with 1 inch 8tpi thread) and the #9 (with M*****,5 thread). Be careful which chuck will you select. The first one may have run out and is being uploaded.
You can contact banggood at cservice@banggood.com directly
You can contact banggood at cservice@banggood.com directly
Answered by Siderization on 06/07/2020Helpful (0)
0
Q:
I would like to know if this plaque is the way it shows or is not complete.Poque the price here for us from Brazil shows and of 147.40 in our currency if it is complete by that price I will ask for a
gostaria de saber se essa placa e do jeito que mostra ou nao e completa.poeque o preco aqui pra nos do brasil mostra e de 147.40 reais na nossa moeda se for completa por esse preco vou pedir uma
The size of the internal thread of my lathe is M33x3,5, in your ad the size of the chuck thread is 1 "x 8TPI, what's the difference, can I use it in my lathe?
The size of the internal thread of my lathe is M33x3,5, in your ad the size of the chuck thread is 1 "x 8TPI, what's the difference, can I use it in my lathe?